No products
Subcategories
Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.
Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
Parts listed here are compatible with Model Ds manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).
Parts listed here are compatible with Model Ds manufactured from July 31, 2006–present (serial numbers 073106–present).
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–January 2021).
Parts listed here are compatible with the Concept2 Slide.
For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. This is the 10' long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. Order two per machine. See more info.
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
For use with Model D RowErgs manufactured from August 2006–present, Model E RowErgs and Dynamic RowErgs. 7 Screw Holes. See more info.
For use with Model D RowErgs manufactured from August 2006–present, Model E RowErgs and Dynamic RowErgs. 7 Screw Holes. See more info.
For use with Concept2 Slides. This is one of the 5/8" wide rollers used under the Slide carriages. Includes the roller bearing. Order four per Slide.
For use with the Model A, B, updated D, E and Dynamic Indoor Rowers. These caster wheels fit on your indoor rower´s front foot (rear foot on the Dynamic) in place of the molded foot cap enabling easy movement for storage or use in another location.
For use with Model A and B Indoor Rowers. This is the left footboard for the Model A and B Indoor Rower (Ergometer). Comes predrilled and includes the three footboard screws and nuts.
For use with Model D RowErgs manufactured from August 2006–present, and Model E RowErgs. Will work only with the Footstretcher Cover, Left, with 7 Screw Holes, PN 2016. See more info.
For use with Model D RowErgs manufactured from August 2006–present, and Model E RowErgs. Will work only with the Footstretcher Cover, Right, with 7 Screw Holes, PN 2015. See more info.
For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...
For use with Concept2 Slides. This is one of the 53 inch long black plastic tracks that the rollers ride on. Included double-sided tape for installation. Order two per Slide. See more info.
For use on all Model C, D and E Indoor Rowers. Includes left and right side of the seat frame. See more info.
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info. Note: Shock cord may be white or green.
For use with Concept2 Slides. This is included in the Slide Shock Cord Fix Kit, part number 1804.
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also for use with Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
For use on all gray Model D Indoor Rowers manufactured from July 2012–present. This is the part that attaches between the monitor arm and the main box frame. See more info.
This bracket is next to the chain guide and supports the monitor arm. For use with light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.
For use on all gray Model D Indoor Rowers manufactured from July 2012–present. This is the part that attaches between the monitor arm and the main box frame. See more info.
This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the left side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. See more info.
This bracket is next to the chain guide and supports the monitor arm. For use with light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.
This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the right side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. See more info.
This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time. See part number 1915. See more info.