Model D, Original
Parts listed here are compatible with Model Ds manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).

Model D, Original There are 115 products.

per page
Showing 26 - 50 of 115 items
  • $12.80

    For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time. See part number 1916, Chain with Sprocket. See more info.

    $12.80
  • $11.90

    This is the original straight wooden handle that came with the Model A, B and C Indoor Rowers. It can be used on all indoor rower models. Includes black rubber grips, handle U-bolt and two nuts. See more info.

    $11.90
  • $11.80

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Includes mounting hardware (nut, bolt, and spacers) that hold the roller on the seat frame. See more info.

    $11.80
  • $11.40

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws (4) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney" shaped seat. See more info.

    $11.40
  • $10.85

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    $10.85
  • $7.00

    For use with Model C and original Model D Indoor Rowers. This is the Framelock Kit for all Model C and original Model D Indoor Rowers. It includes the axle, the framelock, the framelock cord, two screws, two washers and a hexkey tool.

    $7.00
  • $6.80

    This special nut tool is required to replace the flywheel axle sprockets on Model C, D or E Indoor Rowers. Model D and E Axle and Sprocket Replacement

    $6.80
  • $6.00

    For use on all Model C, D and E Indoor Rowers. Includes left and right side of the seat frame. See more info.

    $6.00
  • $5.50

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    $5.50
  • $4.75

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also for use with Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    $4.75
  • $4.50

    This bracket is next to the chain guide and supports the monitor arm. For use with light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.

    $4.50
  • $4.50

    This bracket is next to the chain guide and supports the monitor arm. For use with light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.

    $4.50
  • $4.15

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Includes mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame. See more info.

    $4.15
  • $4.10

    This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.

    $4.10
  • $4.00

    This is a 3-ounce bottle of 3-IN-ONE® Multi-Purpose Oil. Recommended for lubricating the chains on Concept2 Indoor Rowers.

    $4.00
  • $3.65

    For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.

    $3.65
  • $3.60

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    $3.60
  • $3.50

    For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.

    $3.50
  • $3.20

    This tube houses the 5-1/2 inch bolt that holds the monorail hangar assembly together. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine.

    $3.20
  • $3.00

    For use on the Model C, D and E Indoor Rower.

    $3.00
  • $3.00

    For use on the Model C, D and E Indoor Rower.

    $3.00
  • $2.85

    For use with Model C, original Model D and Retrofitted Model A and B Indoor Rowers. This is the 12" molded plastic part anchored with 4 screws and nuts to the metal footplates on the indoor rower, enabling you to adjust the Flexfoot (part number 1063, sold separately) to accommodate different foot sizes and body types. There are two per machine. See more...

    $2.85
  • $2.50

    T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.

    $2.50
  • $2.50

    For use on all Model C, D and E Indoor Rowers. This cover fits the underside of the main box frame to protect the return mechanism from dust and to keep little fingers and pets' tails safe from the moving parts inside. See more info.

    $2.50
  • $2.35

    For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually. 

    $2.35
Showing 26 - 50 of 115 items