Model D, Updated
Parts listed here are compatible with Model Ds manufactured from July 31, 2006–present (serial numbers 073106–present).

Model D, Updated There are 132 products.

per page
Showing 26 - 50 of 132 items
  • $15.00

    For use with Model C Indoor Rowers and black Model D Indoor Rowers manufactured from July 2012–present. Measures 23.5 inches in length. Screws sold separately (part number 1253). See more info.

    $15.00
  • $15.00

    For use with light blue Model D Indoor Rowers manufactured from July 2003–July 2012. Measures 23.5 inches in length. Screws sold separately (part number 1253).  See more info.

    $15.00
  • $15.00

    For use with gray Model D Indoor Rowers manufactured from July 2012–present. Measures 23.5 inches in length. Screws sold separately (part number 1253). See more info.

    $15.00
  • $13.00

    For use on all light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.

    $13.00
  • $13.00

    For use on all black Model D Indoor Rowers manufactured after July 2006. See more info.

    $13.00
  • $13.00

    For use with light blue Model D Indoor Rowers manufactured from July 2003–July 2012. Measures 19 inches in length. Screws sold separately (part number 1253).  See more info. 

    $13.00
  • $13.00

    For use with Model C Indoor Rowers and black Model D Indoor Rowers manufactured from July 2012–present. Measures 19 inches in length. Screws sold separately (part number 1253). See more info.

    $13.00
  • $13.00

    For use with gray Model D Indoor Rowers manufactured from July 2012–present. Measures 19 inches in length. Screws sold separately (part number 1253). See more info.

    $13.00
  • $12.80

    For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time. See part number 1916, Chain with Sprocket. See more info.

    $12.80
  • $11.90

    This is the original straight wooden handle that came with the Model A, B and C Indoor Rowers. It can be used on all indoor rower models. Includes black rubber grips, handle U-bolt and two nuts. See more info.

    $11.90
  • $11.80

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Includes mounting hardware (nut, bolt, and spacers) that hold the roller on the seat frame. See more info.

    $11.80
  • $11.70

    For use on all gray Model D Indoor Rowers manufactured after July 2012 and all SkiErg1s manufactured June 2009–July 2014. See more info.

    $11.70
  • $11.40

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws (4) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney" shaped seat. See more info.

    $11.40
  • $10.85

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    $10.85
  • $7.00

    For use with the Model A, B, updated D, E and Dynamic Indoor Rowers. These caster wheels fit on your indoor rower´s front foot (rear foot on the Dynamic) in place of the molded foot cap enabling easy movement for storage or use in another location.

    $7.00
  • $6.80

    This special nut tool is required to replace the flywheel axle sprockets on Model C, D or E Indoor Rowers. Model D and E Axle and Sprocket Replacement

    $6.80
  • $6.00

    For use on all Model C, D and E Indoor Rowers. Includes left and right side of the seat frame. See more info.

    $6.00
  • $5.50

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    $5.50
  • $4.75

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also for use with Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    $4.75
  • $4.50

    For use on all gray Model D Indoor Rowers manufactured from July 2012–present. This is the part that attaches between the monitor arm and the main box frame. See more info.

    $4.50
  • $4.50

    For use on all gray Model D Indoor Rowers manufactured from July 2012–present. This is the part that attaches between the monitor arm and the main box frame. See more info.

    $4.50
  • $4.50

    This bracket is next to the chain guide and supports the monitor arm. For use with light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.

    $4.50
  • $4.50

    This bracket is next to the chain guide and supports the monitor arm. For use with light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.

    $4.50
  • $4.50

    This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the left side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. See more info.

    $4.50
  • $4.50

    This is the part of the indoor rower that connects to the main box frame on one end and the monitor arm on the other end. This is the right side. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. See more info.

    $4.50
Showing 26 - 50 of 132 items