Model D, Updated
Parts listed here are compatible with Model Ds manufactured from July 31, 2006–present (serial numbers 073106–present).

Model D, Updated There are 132 products.

per page
Showing 51 - 75 of 132 items
  • $4.15

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Includes mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame. See more info.

    $4.15
  • $4.10

    This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.

    $4.10
  • $4.00

    This is a 3-ounce bottle of 3-IN-ONE® Multi-Purpose Oil. Recommended for lubricating the chains on Concept2 Indoor Rowers.

    $4.00
  • $3.65

    For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.

    $3.65
  • $3.60

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    $3.60
  • $3.50

    For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.

    $3.50
  • $3.50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.

    $3.50
  • $3.50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.

    $3.50
  • $3.00

    For use on the Model C, D and E Indoor Rower.

    $3.00
  • $3.00

    For use on the Model C, D and E Indoor Rower.

    $3.00
  • $2.75

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    $2.75
  • $2.75

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    $2.75
  • $2.55

    For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.

    $2.55
  • $2.50

    For use on all Model C, D and E Indoor Rowers. This cover fits the underside of the main box frame to protect the return mechanism from dust and to keep little fingers and pets' tails safe from the moving parts inside. See more info.

    $2.50
  • $2.50

    T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.

    $2.50
  • $2.40

    For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.

    $2.40
  • $2.35

    For use with updated Model D, Model E and Dynamic Indoor Rowers.  Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram

    $2.35
  • $2.20

    For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.

    $2.20
  • $2.10

    For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.

    $2.10
  • $2.00

    For use on the front legs of Model C, D (original and updated) and E Indoor Rowers, this is a bag of eight patched fasteners. If you need to replace missing fasteners on the front leg of your indoor rower, this is what you need. Important: For use only on the front leg of Models C, D, and E Indoor Rowers; not intended for use in other areas of the...

    $2.00
  • $2.00

    For use on all Model D Indoor Rowers. This label illustrates proper rowing technique. Place just above the handle hook.

    $2.00
  • $2.00

    For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present.

    $2.00
  • $1.85

    For use on all Model C, D and E Indoor Rowers. This is the 17mm bearing located outside of the flywheel. The corresponding bearing cup (part number 1012) is sold separately. See more info.

    $1.85
  • $1.70

    For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. See more info.

    $1.70
  • $1.50

    For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.

    $1.50
Showing 51 - 75 of 132 items