No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
General Information
SkiErgs There are 54 products.
Subcategories
- $5.00
2104: Pulley with Bearing—SkiErg1
For use on the gray SkiErg manufactured from July 2009–July 2014. This is the pulley inside the pulley assembly on which the shock cord travels. See more info.
$5.00 - $5.00
2736: Short Blue Cord—SkiErg1
For use on the gray SkiErg manufactured July 2009–July 2014. This is the 7' 2" long blue cord that runs from the shock cord to the drive spool. See more info.
$5.00 - $5.00
2759: Footcaster Assembly Right—SkiErg1 Floor Stand
For use on the original SkiErg Floor Stand manufactured from July 2009–July 2014. This caster wheel fits on the right side of the SkiErg Floor Stand, enabling easy movement for storage or use in another location. See more info.
$5.00 - $5.00
2760: Footcaster Assembly Left—SkiErg1 Floor Stand
For use on the original SkiErg Floor Stand manfactured from July 2009–July 2014. This caster wheel fits on the right side of the SkiErg Floor Stand, enabling easy movement for storage or use in another location. See more info.
$5.00 - $3.50
2802: SkiErg Handle Hooks
For use with the black SkiErg. The SkiErg Handle Hooks attach to both sides of the SkiErg near the monitor and hold the SkiErg handles in place lower on the machine so that the handles are within reach for people using the SkiErg from a wheelchair or seated position.
$3.50 - $3.50
1059: Foot Caster, Right
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.
$3.50 - $3.50
1060: Foot Caster, Left
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.
$3.50 - $3.30
2744: Foot—SkiErg1 Floor Stand
For use on the original SkiErg Floor Stand manufactured from July 2009–July 2014. This is the hard plastic cap that goes on each of the two front corners of the SkiErg Floor Stand. Two per Floor Stand. Sold individually. See more info.
$3.30 - $3.00
1352: Technique Label—SkiErg
For use on the Concept2 SkiErg. This label illustrates the recommended SkiErg technique for the double-pole or alternating arms motion. Place on the front or the side, just below the Performance Monitor.
$3.00 - $2.50
2230: T27 6-Lobe Driver
T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers. Also used for various 6-Lobe fasteners on the SkiErg2.
$2.50 - $2.50
2835: Shock Cord—SkiErg2
For use on the black SkiErg manufactured August 2014–present. This is the 13' long elastic shock cord (or bungee cord) that provides recoiling. Order two per machine. See more info. Note: Shock cord may be green or white.
$2.50 - $2.20
2751: Handle Bumper
This is the 7-1/2 inch rubber handle bumper for the gray SkiErg manufactured between July 2009–July 2014. See more info.
$2.20 - $1.50
1325: Damper Ring
For use on the gray SkiErg manufactured from July 2009—July 2014. This is the damper ring for the fan cover assembly. See more info.
$1.50 - $1.10
2872: SkiErg Floor Stand Spare Fasteners
This kit consists of fasteners missing from parts kits found in floor stands manufactured between 10/3/16–10/10/16. Please contact Concept2 with any questions or concerns. Kit includes: 2 x PN1259 (black washer) 2 x PN2206 (1 ¼” bolt)
$1.10 - $1.00
1098: Smartphone Cradle for PM5, PM4 and PM3
For use with a PM5, PM4 or PM3, the Smartphone Cradle slides onto the top of the PM to provide a place to set your mobile device while using the indoor rower, SkiErg or BikeErg.
$1.00 - $0.60
1010: Bearing Cover
For use with Model C and D Indoor Rowers and all SkiErgs Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel, and the back side of all SkiErgs.
$0.60 - $0.45
1047: Swivel Pulley Housing—SkiErg1
For use on the gray SkiErg manufactured from July 2009–July 2014. This is the housing of the swivel pulley assembly on which the shock cord traves. See more info.
$0.45 - $0.30
1253: Screw, 6-lobe, 1/4-20 x 5/8, epoxy
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.
$0.30 - $0.25
1013: R8 Bearing Cup—Model C, D, E, Dynamic
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. See more info.
$0.25 - $0.20
1276: Flywheel Cover Bolt 10 x 3
This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Order four per machine.
$0.20 - $0.20
1302: Seat Spacer—Model C, D, E, SkiErg
For use on all Model C, D and E Indoor Rowers. This is the 1/4 inch long seat spacer used in the hardware of the seat assembly. Order six for each seat assembly. Also used on all SkiErgs. See more info.
$0.20 - $0.15
1271: Hexnut, 3/8-16
This is the monitor bolt nut for the Model D and E Indoor Rower and all SkiErgs.
$0.15 - $0.12
1248: Screw, 6-lobe, 1/4-20 x 3/4
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014. See more info.
$0.12 - $0.10
1244: Nut, 3/8-16, nylock
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manufactured between July 2009–July 2014. See more info.
$0.10 - $0.10
1235: Nut for Handle U-bolt
This is the 1/4-20 Nylock nut that is used with the composite handle that comes standard on the Model D and E Indoor Rowers. The corresponding U-bolt is part number 244. Order two per handle. Also used in various places on the Model C and Dynamic Indoor Rower and all SkiErgs. See more info.
$0.10
