No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
General Information
Parts There are 220 products.
Subcategories
Model A
Parts listed here are compatible with Model A Indoor Rowers. Model As were manufactured from 1981–1986.Model B
Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.
Model C
Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
Model D, Original
Parts listed here are compatible with Model Ds manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).
Model D/RowErg
Parts listed here are compatible with Model Ds manufactured from July 31, 2006–present (serial numbers 073106–present).
Model E
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–January 2021).
Dynamic
Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).Slide
Parts listed here are compatible with the Concept2 Slide.
- $0.30
1253: Screw, 6-lobe, 1/4-20 x 5/8, epoxy
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.
$0.30 - $0.25
1521: Model C Damper Button
This is a plastic damper button that can be used if the damper on your Model C falls down and won't stay in position. See more.
$0.25 - $0.25
1233: Screw, 6-lobe 1/4-20 x 1—Model E
For use in various places on all Model E Indoor Rowers. See more info.
$0.25 - $0.25
1238: Screw, 6-lobe, 1/4-20 x 3/8
This is the handle hook screw on the Model C, D and E Indoor Rower. See more info.
$0.25 - $0.25
240: Nut for the Handle U-bolt
This is the 1/4-20 heavy Nylock nut that is used with the wooden handle that came standard on the Model A, B and C Indoor Rowers. The corresponding U-bolt is part number 244. Order two per handle. See more info.
$0.25 - $0.25
1303: Spacer, Traveling Pulley—Model C, D, E,...
For use on all Model C, D, E and Dynamic Indoor Rowers. This is the 5/8 inch long spacer found in the return mechanism's travelling pulley. Also used in the monitor arm assembly on the Dynamic Indoor Rower.
$0.25 - $0.25
1013: R8 Bearing Cup—Model C, D, E, Dynamic
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. See more info.
$0.25 - $0.24
1250: Screw, 6-lobe 1/4-20 x 1-1/2—Model E
For use with all Model E Indoor Rowers. This screw is used in the chain housing. See more info.
$0.24 - $0.20
1276: Flywheel Cover Bolt 10 x 3
This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Order four per machine.
$0.20 - $0.20
1270: Nut, 3/8-16, nylock
This is the monitor arm bolt nut for the Model D and E Indoor Rower.
$0.20 - $0.20
1247: Screw, 6-lobe 1/4-20 x 1—Model E
For use with all Model E Indoor Rowers. This screw is used to attach the flywheel cover to the chain guide. Order six per machine. See more info.
$0.20 - $0.20
1302: Seat Spacer—Model C, D, E, SkiErg
For use on all Model C, D and E Indoor Rowers. This is the 1/4 inch long seat spacer used in the hardware of the seat assembly. Order six for each seat assembly. Also used on all SkiErgs. See more info.
$0.20 - $0.20
1251: Polydrive Rivet
This is used on the monorail hanger system on the Model C, D and E Indoor Rower.
$0.20 - $0.18
1201: Screw, 6-lobe, 1/4-20 x 3/4
Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
$0.18 - $0.15
1259: Washer, 1/4" Black—Model C
For use with all Model C Indoor Rowers. This washer is used in the Guide Bracket/Monitor Arm area of the machine. See more info.
$0.15 - $0.15
1271: Hexnut, 3/8-16
This is the monitor bolt nut for the Model D and E Indoor Rower and all SkiErgs.
$0.15 - $0.15
1305: Chain Idler Spacer
This is the spacer that fits on either side of the chain idler pulley (part number 1724) on the Model C, D and E Indoor Rowers. See more info.
$0.15 - $0.14
1231: Screw, 6-lobe, 1/4-20 x 1/2, epoxy
Used in various places on the Model C, D and E Indoor Rower. See more info.
$0.14 - $0.12
1209: Nut, 3/8-16, nylock
This is used on the seat frame on the Model C, D and E Indoor Rower. See more info.
$0.12 - $0.12
1248: Screw, 6-lobe, 1/4-20 x 3/4
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014. See more info.
$0.12 - $0.10
1244: Nut, 3/8-16, nylock
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manufactured between July 2009–July 2014. See more info.
$0.10 - $0.10
68A: Seat Rubber Washer—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This is part of the seat roller hardware.
$0.10 - $0.10
384: Nut for Leg U-bolt—Model B
For use on the Model B Indoor Rower to connect the legs to the monorail.
$0.10 - $0.10
215: Skewer Screw
For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. Holds the skewer assembly in place in the monorail. Order four per machine.
$0.10 - $0.10
1235: Nut for Handle U-bolt
This is the 1/4-20 Nylock nut that is used with the composite handle that comes standard on the Model D and E Indoor Rowers. The corresponding U-bolt is part number 244. Order two per handle. Also used in various places on the Model C and Dynamic Indoor Rower and all SkiErgs. See more info.
$0.10
