Model E
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).

Model E There are 115 products.

per page
Showing 26 - 50 of 115 items
  • $11.80

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Includes mounting hardware (nut, bolt, and spacers) that hold the roller on the seat frame. See more info.

    $11.80
  • $11.40

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws (4) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney" shaped seat. See more info.

    $11.40
  • $10.85

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    $10.85
  • $7.00

    For use with the Model A, B, updated D, E and Dynamic Indoor Rowers. These caster wheels fit on your indoor rower´s front foot (rear foot on the Dynamic) in place of the molded foot cap enabling easy movement for storage or use in another location.

    $7.00
  • $6.80

    This special nut tool is required to replace the flywheel axle sprockets on Model C, D or E Indoor Rowers. Model D and E Axle and Sprocket Replacement

    $6.80
  • $6.00

    For use on all Model C, D and E Indoor Rowers. Includes left and right side of the seat frame. See more info.

    $6.00
  • $5.50

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    $5.50
  • $4.75

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also for use with Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    $4.75
  • $4.15

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Includes mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame. See more info.

    $4.15
  • $4.00

    This is a 3-ounce bottle of 3-IN-ONE® Multi-Purpose Oil. Recommended for lubricating the chains on Concept2 Indoor Rowers.

    $4.00
  • $3.65

    For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.

    $3.65
  • $3.60

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    $3.60
  • $3.50

    For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.

    $3.50
  • $3.50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.

    $3.50
  • $3.50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.

    $3.50
  • $3.35

    For use on the front and rear legs of the Model E Indoor Rower, this is a bag of eight patched fasteners and two unpatched fasteners. Contains two part number 1233 and eight part number 1253. Driver (part number 2230) not included.  

    $3.35
  • $3.00

    For use on the Model C, D and E Indoor Rower.

    $3.00
  • $3.00

    For use on the Model C, D and E Indoor Rower.

    $3.00
  • $2.75

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    $2.75
  • $2.75

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    $2.75
  • $2.55

    For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.

    $2.55
  • $2.50

    For use on all Model C, D and E Indoor Rowers. This cover fits the underside of the main box frame to protect the return mechanism from dust and to keep little fingers and pets' tails safe from the moving parts inside. See more info.

    $2.50
  • $2.50

    T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.

    $2.50
  • $2.40

    For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.

    $2.40
  • $2.35

    For use with updated Model D, Model E and Dynamic Indoor Rowers.  Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram

    $2.35
Showing 26 - 50 of 115 items