skip to main content
Model B

Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.

Model B There are 53 products.

per page
Showing 1 - 25 of 53 items
  • $170.00

    For use with all Model B Indoor Rowers. This is the entire return mechanism including the skewer bar, chain, shock cord, shock cord pulleys, travelling pulley, chain slide, S.C.A.M. and four skewer screws. See more info.

    $170.00
  • $160.00

    Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (not included), and is backlit for improved visibility. Device holder or Smartphone Cradle included in some kits*. *See More Info. Select the correct machine when buying this part. (If not listed, that part is out of stock.) If you're buying a RowErg, SkiErg or...

    $160.00
  • $110.00

    For use with Model B Indoor Rowers only. Includes the most common wear and tear parts to keep your Model B in top condition. See more info.

    $110.00
  • $90.60

    For use with the Model A and B Indoor Rower (Ergometer) only. This seat assembly includes the seat top, carriage, seat rollers and hardware.

    $90.60
  • $66.00

    For use with Model B Indoor Rowers only. 20" long pickup (sensor) and cable (wire) that transmit flywheel motion to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely...

    $66.00
  • $48.32

    For use with the Model A and B Indoor Rower (Ergometer) only. This is the seat top and carriage only. Does not include hardware or seat rollers.

    $48.32
  • $38.50

    For use with Model A and B Indoor Rowers. Order this kit if you want to upgrade your Model A or B with the flexfeet standard on new indoor rowers. New flexfeet provide wider range of motion, greater security for the heel, easier adjustability to accommodate a wide range of foot sizes. See more info.

    $38.50
  • $36.00

    For use with Model B Indoor Rowers only. This is the 2" x 1-5/8" x 5/8" plastic travelling pulley assembly with gear used to connect the shock cord to the chain. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the rower monorail on every stroke. One per machine. See more info.

    $36.00
  • $34.00

    For use with the Model A and B Indoor Rower (Ergometer) only.

    $34.00
  • $31.20

    For use with Model B Indoor Rowers only. Sprockets (gears) for the Model B flywheel axle. Includes both inner (15 tooth) and outer (13 tooth) sprockets. A new chain (part number 280) is also strongly recommended if you are replacing sprockets. The Flywheel Cog Tool Set (part number 484) is required to change sprockets and should be added to your order...

    $31.20
  • $28.85

    This is the original straight wooden handle that came with the Model A, B and C Indoor Rowers. It measures 16" long and can be used on all indoor rower models. Includes black rubber grips, handle U-bolt and two nuts. See more info.

    $28.85
  • $28.85

    For use with Model B Indoor Rowers. This 10ft long chain comes with a brass swivel at the handle end and chain connectors for the inside end. Fits Model B Indoor Rowers only. If your chain is badly rusted, has seized links or is broken, replace it with this part. See more info.

    $28.85
  • $26.00

    For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. This is the 10' long elastic shock cord (or bungee cord) that recoils the chain on recovery. Includes two 1-1/8" shock cord pulleys. See more info.

    $26.00
  • $15.80

    For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers and its hardware (order a quantity of three per indoor rower) that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside) and includes all of the mounting hardware (nut, bolt, and spacers) that holds it into the...

    $15.80
  • $15.00

    For use with Model B and C Indoor Rowers. This kit allows you to retrofit the handle that comes standard on the Model D, E and  Dynamic Indoor Rowers to your Model B or C. Handle is 19.5" long with overmolded grips and features an ergonomic 10-degree bend that better simulates arm position of on water rowing and provides a more comfortable position...

    $15.00
  • $15.00

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    $15.00
  • $14.32

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws (4) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney" shaped seat. See more info.

    $14.32
  • $12.25

    For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside). Does not include mounting hardware. If you also need mounting hardware, order part number 378 instead. See more info.

    $12.25
  • $11.20

    For use with Model B Indoor Rowers only. A bracket and handle hook to retrofit the handle hook on your Model B. If you are planning to upgrade the handle on your Model B Indoor Rower to the handle that is standard on Model D, E and Dynamic Indoor Rowers, we recommend purchasing this part, because the original handle hook on the Model B does not...

    $11.20
  • $9.95

    For use with the Model A and B Indoor Rower (Ergometer) only.  This is the heel rest for the Model A and B Indoor Rower (Ergometer). Includes two screws, washers and wing nuts. See more info.

    $9.95
  • $9.00

    For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. This is the 10' long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    $9.00
  • $8.50

    For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. Order two per machine. See more info.

    $8.50
  • $7.00

    For use with the Model A, B, updated D, E and Dynamic Indoor Rowers. These caster wheels fit on your indoor rower´s front foot (rear foot on the Dynamic) in place of the molded foot cap enabling easy movement for storage or use in another location.

    $7.00
  • $6.90

    For use with Model A and B Indoor Rowers. This is the left footboard for the Model A and B Indoor Rower (Ergometer). Comes predrilled and includes the three footboard screws and nuts.

    $6.90
  • $4.00

    This is a 3-ounce bottle of 3-IN-ONE® Multi-Purpose Oil. Recommended for lubricating the chains on Concept2 Indoor Rowers.

    $4.00
Showing 1 - 25 of 53 items