skip to main content

Parts There are 226 products.

Subcategories

  • Model A
    Parts listed here are compatible with Model A Indoor Rowers. Model As were manufactured from 1981–1986.
  • Model B

    Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.

  • Model C
    Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
  • Model D, Original
    Parts listed here are compatible with Model Ds manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).
  • Model D/RowErg

    Parts listed here are compatible with Model Ds manufactured from July 31, 2006–present (serial numbers 073106–present).

  • Model E
    Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).
  • Dynamic
    Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).
per page
Showing 1 - 25 of 226 items
  • $180.00

    The Tall Legs Retrofit Kit includes a set of front and rear legs that change the seat height of the RowErg from 14 inches (36 cm) to 20 inches (51 cm). This brings the seat to the same height as a RowErg with tall legs or a Concept2 Model E Indoor Rower.

    $180.00
  • $160.00

    Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (not included), and is backlit for improved visibility. Smartphone Cradle included in some kits*. *See More Info. IMPORTANT:  - Select the correct machine when buying this part. (If not listed, that PM is out of stock.) - If you're buying a RowErg, SkiErg or...

    $160.00
  • $160.00

    Boxlot of 25 seat rollers. For use with Model C, D, E and Dynamic Indoor Rowers. 3-1/4 inch wide top seat rollers (two per machine) that run on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. 

    $160.00
  • $150.00

    For use with all Model A Indoor Rowers. This is the entire return mechanism including the skewer bar, chain, shock cord, shock cord pulleys, travelling pulley, chain slide, S.C.A.M. and four skewer screws. See more info.

    $150.00
  • $145.00

    For use with all Model B Indoor Rowers. This is the entire return mechanism including the skewer bar, chain, shock cord, shock cord pulleys, travelling pulley, chain slide, S.C.A.M. and four skewer screws. See more info.

    $145.00
  • $130.00

    For use with Model E Indoor Rowers manufactured from August 2006–March 2011. Includes caster wheels.

    $130.00
  • $130.00

    For use on the Model E Indoor Rower manufactured from March 2011–present. Includes caster wheels. See more info.

    $130.00
  • $110.00

    For use with Model A Indoor Rowers only. Includes the most common wear and tear parts to keep your Model A in top condition. See more info.

    $110.00
  • $90.60

    For use with the Model A and B Indoor Rower (Ergometer) only. This seat assembly includes the seat top, carriage, seat rollers and hardware.

    $90.60
  • $90.00

    For use with Model E Indoor Rowers manufactured from August 2006–March 2011. Includes molded foot caps. Does not include the hardware or the rear bumber.

    $90.00
  • $90.00

    For use with Model E Indoor Rowers manufactured from March 2011–present. Includes molded foot caps. Does not include the hardware or the rear bumber. See more info.

    $90.00
  • $80.00

    For use with Model B Indoor Rowers only. Includes the most common wear and tear parts to keep your Model B in top condition. See more info.

    $80.00
  • $59.50

    This is the damper-side cover for the Model C Indoor Rower. Does not include the damper fan cover screws (order separately, part number 1231). See more info.

    $59.50
  • $50.00

    For use on all Model C, D and E Indoor Rowers.  Includes seat top, seat frame, seat rollers and hardware. See more info.

    $50.00
  • $50.00

    For use with Model B Indoor Rowers only. 20" long pickup (sensor) and cable (wire) that transmit flywheel motion to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely...

    $50.00
  • $45.00

    For use with Model C Indoor Rowers only. Includes the most common wear and tear parts to keep your Model C in top condition. See more info.

    $45.00
  • $43.45

    For use with Model C Indoor Rowers. Replaces the original Model C parts with smoother, quieter Model D parts. This kit includes 14 tooth quiet sprocket, axle, chain idler pulley, nickel chain with connectors and swivel, 17mm bearing, 17mm bearing cup, screws and nuts. See more info.

    $43.45
  • $40.00

    For use on all Model C Indoor Rowers. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes all four U-hole nuts. See more info.

    $40.00
  • $38.50

    For use with Model A and B Indoor Rowers. Order this kit if you want to upgrade your Model A or B with the style flexfeet standard on new indoor rowers. New flexfeet provide wider range of motion, greater security for the heel, easier adjustability to accommodate a wide range of foot sizes. See more info.

    $38.50
  • $37.45

    For use with the Model A and B Indoor Rower (Ergometer) only. This is the seat top and carriage only. Does not include hardware or seat rollers.

    $37.45
  • $32.00

    For use with all Model E Indoor Rowers and Model D Indoor Rowers manufactured from August 2006–present. Includes the most common wear and tear parts to keep your indoor rower in top condition. See more info.

    $32.00
  • $32.00

    For use with original Model D Indoor Rowers only. Includes the most common wear and tear parts to keep your Model D in top condition. See more info.

    $32.00
  • $30.00

    For use with Model B Indoor Rowers only. Sprockets (gears) for the Model B flywheel axle. Includes both inner (15 tooth) and outer (13 tooth) sprockets. A new chain (part number 280) is also strongly recommended if you are replacing sprockets. The Flywheel Cog Tool Set (part number 484) is required to change sprockets and should be added to your order...

    $30.00
  • $28.85

    For use with Model B Indoor Rowers. This 10ft long chain comes with a brass swivel at the handle end and chain connectors for the inside end. Fits Model B Indoor Rowers only. If your chain is badly rusted, has seized links or is broken, replace it with this part. See more info.

    $28.85
  • $26.00

    For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. This is the 10' long elastic shock cord (or bungee cord) that recoils the chain on recovery. Includes two 1-1/8" shock cord pulleys. See more info.

    $26.00
Showing 1 - 25 of 226 items