SkiErg 2

Parts listed here are compatible with the SkiErg 2, manufactured from August 2014–present (shown below with optional floor stand).

SkiErg 2 There are 23 products.

Showing 1 - 23 of 23 items
  • $24.00

    For use on the black SkiErg manufactured August 2014–present. Contains everything you need to replace both handle cords. See more info.

    $24.00
  • $20.65

    This is the damper-side cover for the black SkiErg manufactured since August 2014–present. Does not include the four damper fan cover screws (order separately, part number 1276). See more info.

    $20.65
  • $17.85

    For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. See more info.

    $17.85
  • $15.80

    For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut. See more info.

    $15.80
  • $14.50

    For use on the black SkiErg manufactured August 2014–present. This is the drive spool (the drive cord is not included). Order two drive spools per machine. See more info.

    $14.50
  • $9.00

    For use on all black SkiErgs manufactured from Aug 2014–Present or any gray SkiErg that has already been retrofitted with this handle. Contains two handles and two plugs. See more info.

    $9.00
  • $3.50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.

    $3.50
  • $3.50

    For use on the black SkiErg manufactured August 2014–present. This is the 13' long elastic shock cord (or bungee cord) that provides recoiling. Order two per machine. See more info.

    $3.50
  • $3.50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.

    $3.50
  • $2.50

    T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers. Also needed for various 6-Lobe fasteners on the SkiErg2.

    $2.50
  • $1.50

    For use on all Model C, D, E, and Dynamic Indoor Rowers and the SkiErg. Using this knob instead of a nut makes it easier to take the monitor on and off of the equipment.

    $1.50
  • $1.25

    For use on all SkiErgs. This is the bearing located on both the flywheel and non-flywheel sides of the machine. Order two bearings per machine. The corresponding bearing cup (part number 1013) is sold separately. See more info.

    $1.25
  • $1.00

    For use with Model C and D Indoor Rowers and all SkiErgs Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel, and the back side of all SkiErgs.

    $1.00
  • $0.60

    This kit consists of fasteners missing from parts kits found in floor stands manufactured between 10/3/16–10/10/16. Please contact Concept2 with any questions or concerns. Kit includes: 2 x PN1259 (black washer) 2 x PN2206 (1 ¼” bolt)

    $0.60
  • $0.35

    For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. See more info.

    $0.35
  • $0.20

    This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Order four per machine.

    $0.20
  • $0.20

    For use on all Model C, D and E Indoor Rowers. This is the 1/4 inch long seat spacer used in the hardware of the seat assembly. Order six for each seat assembly. Also used on all SkiErgs. See more info.

    $0.20
  • $0.15

    This is the monitor bolt nut for the Model D and E Indoor Rower and all SkiErgs.

    $0.15
  • $0.10

    This is the 1/4-20 Nylock nut that is used with the composite handle that comes standard on the Model D and E Indoor Rowers. The corresponding U-bolt is part number 244. Order two per handle. Also used in various places on the Model C and Dynamic Indoor Rower and all SkiErgs.  See more info.

    $0.10
  • $0.10

    This washer is used in the monitor mount and in the flywheel on all Model C, D, E and Dynamic Indoor Rowers and all SkiErgs. See more info.

    $0.10
  • $0.05

    For use with all Model D, E and Dynamic Indoor Rowers and all SkiErgs. This nut is used with the perf outlet. See more info.

    $0.05
  • $0.05

    Used in various places on the Model D, E and Dynamic Indoor Rower and all SkiErgs.

    $0.05
  • $0.05

    For use with all Model D, E and Dynamic Indoor Rowers and all SkiErgs. This screw is used with the perf outlet. See more info.

    $0.05
Showing 1 - 23 of 23 items