No products
Subcategories
Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.
Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
Parts listed here are compatible with Model Ds manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).
Parts listed here are compatible with Model Ds manufactured from July 31, 2006–present (serial numbers 073106–present).
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–January 2021).
Parts listed here are compatible with the Concept2 Slide.
This is a 3-ounce bottle of 3-IN-ONE® Multi-Purpose Oil. Recommended for lubricating the chains on Concept2 Indoor Rowers.
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
Seat roller mounting hardware for use with the Model A and B Indoor Rowers. Used with the 2-1/4 inch wide seat rollers (three per machine). Includes one bolt, one nut, two rubber washers, and two spacers. See more info.
For use on the front and rear legs of the Model E Indoor Rower, this is a bag of eight patched fasteners and two unpatched fasteners. Contains two part number 1233 and eight part number 1253. Driver (part number 2230) not included.
For use with Model A and B Indoor Rowers. This chain slide protects the chain as it enters and exits the monorail in the front of the indoor rower.
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Includes mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame. See more info.
This tube houses the 5-1/2 inch bolt that holds the monorail hangar assembly together. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine.
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
For use on RowErgs and Model C, D and E Indoor Rowers. This label illustrates proper rowing technique. Place just above the handle hook.
T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers. Also used for various 6-Lobe fasteners on the SkiErg2.
For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually.
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. Includes the hanger shaft, two screws and two nuts. See more info.
This is the handle hook for a Model B Indoor Rower. Order two per machine. The rubber handle hook cover, part number 136, is sold separately.
For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
For use on the front legs of Model C, D (original and updated) and E Indoor Rowers, this is a bag of eight patched fasteners. If you need to replace missing fasteners on the front leg of your indoor rower, this is what you need. Important: For use only on the front leg of Models C, D, and E Indoor Rowers; not intended for use in other areas of the...
For the Dynamic Indoor Rower only. The clear plastic Wind Shield is designed to deflect air coming from the flywheel away from the rower´s body.
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...